OP186

–10–

REV. 0

APPLICATIONS

The OP186 is very similar in design to the OP181. Please see the

OP181/OP281/OP481 data sheet for applications information.

Design of the OP186 was based on the OP181. The major dif-

ference is that the trim structures have been removed. This

results in the offset of the OP186 being higher than the OP181.

There are no other major changes to the circuit. Other perfor-

mance differences, such as the higher bandwidth and slightly

higher supply current, also result from the removal of the trim

resistors.

50mV

100 s

Figure 28. Small Signal Transient

Response

100 s

1.0V

Figure 31. Saturation Recovery Time

1.0V

200 s

Figure 29. No Phase Reversal

500mV

100 s

Figure 30. Saturation Recovery Time