EVAL-ADF4113EB2

–5–

REV.PrA 01/00

Figure 5. Software Front Panel

Software Description

The software comes on a CD marked "ADF4xxx evalua-

tion software".

If the user double clicks on “setup.exe” on

the CD, then the install wizard installs the software.

Fol-

low the on-screen directions. The software will be in-

stalled in

a default directory called

“C:\ProgramFiles\Analog Devices\ADF4XXX_rev0”.

The installation will create a shortcut under Analog De-

vices by default. The program can be run by clicking on

ADF4XXX_rev0.

On running the software a panel appears which asks the

user to choose the device to progam. Select the ADF4113.

The front panel will appear with some arbitrary values.

The evaluation board can be setup exactly by clicking

"Eval Board" near the top right corner of the panel. From

the following menu select ADF4113EB2.

This will program the device to the recommended settings

for the setup (i.e. charge pump current, prescaler, polarity

etc.) The user can adjust any of the settings by clicking

with the left mouse button on that feature and adjusting it

accordingly. The drop-down menus contain options to

examine the various test-modes or to set the configuration

options.

There is also a facility to monitor the Supply and Charge

Pump Voltage as well as the Device Current. To get the

most up to date reading just click on the "UpdateVoltage

and Current Display Button".