TPD4E05U06

TPD4E05U06

TPD5S115

SLVSBL2B – OCTOBER 2012 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ORDERING INFORMATION

ORDERABLE PART

TOP-SIDE

NUMBER

MARKING

–40°C to 85°C

YFF

Tape and reel

TPD5S115YFFR

RE115

(1)

Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(2)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

Web site at www.ti.com.

SYSTEM LEVEL BLOCK DIAGRAM

Figure 1. Application Schematics for HDMI Controllers with one GPIO for HDMI Interface Control

Some HDMI controllers may have only one GPIO to control the HDMI interface. Refer to Figure 1, HDMI Driver

Chip is controlling the TPD5S115 via only one control line (EN). In this mode the HPD_A to LS_OE pin are

connected shown in the above oval dotted line.

2

Submit Documentation Feedback

Copyright © 2012–2013, Texas Instruments Incorporated

Product Folder Links: TPD5S115