ADMC200AP datasheet(4/12 Pages) AD

4 / 12 page

ADMC200

REV. B

–4–

ORDERING GUIDE

Part

Temperature

Package

Number

Range

Description

Option

ADMC200AP

–40

°C to +85°C

68-Lead PLCC P-68A

CLK

A0–A3

DATA

Figure 4. Read Cycle Timing Diagram

ABSOLUTE MAXIMUM RATINGS*

Supply Voltage (VDD) . . . . . . . . . . . . . . . . . . –0.3 V to +7.0 V

Digital Input Voltage . . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD

Analog Input Voltage . . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD

Analog Reference Input Voltage . . . . . . . . . . . . –0.3 V to VDD

Digital Output Voltage Swing . . . . . . . . . . . . . . –0.3 V to VDD

Analog Reference Output Swing . . . . . . . . . . . . –0.3 V to VDD

Operating Temperature . . . . . . . . . . . . . . . . . –40

°C to +85°C

Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . +280

°C

*Stresses greater than those listed above may cause permanent damage to the

device. These are stress ratings only; functional operation of the device at these or

any other conditions greater than those indicated in the operational sections of this

specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the ADMC200 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

ADMC200AP bảng dữ liệu(PDF) 4 Page - Analog Devices

ADMC200AP bảng dữ liệu(HTML) 4 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

bảng dữ liệu tải về

Link URL