®

© Coilcraft, Inc. 2012

1102 Silver Lake Road

Cary, IL 60013

Phone 800-981-0363

Fax 847-639-1508

Email cps@coilcraft.com

www.coilcraft-cps.com

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specifications subject to change without notice.

Please check our web site for latest information.

±20% (µH)

typ

max

min

typ

20°C rise

40°C rise

ML512PYA181MLZ

0.18

1.59

1.75

113

141

39

18.0

24.0

ML512PYA331MLZ

0.33

2.30

2.53

71

89

30

15.0

18.8

ML512PYA561MLZ

0.56

3.01

3.31

49

61

29

12.0

16.5

ML512PYA102MLZ

1.0

5.62

6.18

40

50

23

9.8

13.5

ML512PYA122MLZ

1.2

6.82

7.50

34

43

22

9.0

12.0

ML512PYA182MLZ

1.8

9.57

10.52

27

34

18.2

7.6

10.5

ML512PYA222MLZ

2.2

12.70

13.97

24

30

15.9

5.3

7.5

ML512PYA332MLZ

3.3

19.92

20.81

21

26

12.2

4.5

6.0

6030 POWER INDUCTORS

Terminations Tin-silver (96.5/3.5) over copper.

Core material Composite

Weight 0.6 – 0.7 g

Ambient temperature –55°C to +105°C with Irms current, +105°C

to +155°C with derated current

Storage temperature Component: –55°C to +155°C.

Tape and reel packaging: –55°C to +80°C

Resistance to soldering heat Max three 40 second reflows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /

85% relative humidity)

Enhanced crush-resistant packaging 400/7

″reel

Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing,

3.12 mm pocket depth

■

High temperature materials allow operation in ambient

temperatures up to 155°C

■

Passes vibration testing to 80 G and shock testing to 1000 G

■

Exceptionally low DCR – 1.59 mOhm

■

Soft saturation makes them ideal for VRM/VRD applications.

1. When ordering, please specify

testing code:

ML512PYA332MLZ

Testing:

Z = COTS

H = Screening per Coilcraft CP-SA-10001

N = Screening per Coilcraft CP-SA-10004

2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.

3. DCR measured on a micro-ohmmeter.

4. SRF measured using an Agilent/HP 4395A or equivalent.

5. Typical dc current at which the inductance drops 30% from its value without current.

6. Typical current that causes the specified temperature rise from 25°C ambient.

7. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Irms Testing

Irms testing was performed on a

0.060

″ thick pcb with 4 oz. copper

traces optimized to minimize ad-

ditional temperature rise.

Temperature rise is highly depen-

dent on many factors including

pcb land pattern, trace size, and

proximity to other components.

Therefore temperature rise

should be verified in application

conditions.

Document ML800-1 Revised 09/17/12