ADG436 datasheet(4/8 Pages) AD

4 / 8 page

ADG436

REV. A

–4–

SOIC Package

JA, Thermal Impedance

. . . . . . . . . . . . . . . . . . . . . 77

°C/W

Lead Temperature, Soldering

Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . +215

°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220

°C

NOTES

1Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those listed in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability. Only one absolute

maximum rating may be applied at any one time.

2Overvoltages at IN, S or D will be clamped by internal diodes. Current should be

limited to the maximum ratings given.

ABSOLUTE MAXIMUM RATINGS

(TA = +25

°C unless otherwise noted)

VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 V

VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +30 V

VSS to GND . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –30 V

Analog, Digital Inputs

. . . . . . . . . . . VSS – 2 V to VDD + 2 V

or 20 mA, whichever occurs first

Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 20 mA

Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA

(Pulsed at 1 ms, 10% Duty Cycle max)

Operating Temperature Range

Industrial (B Version) . . . . . . . . . . . . . . .

–40

°C to +85°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +125°C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . +150

°C

Plastic DIP Package

JA, Thermal Impedance

. . . . . . . . . . . . . . . . . . . 117

°C/W

Lead Temperature, Soldering (10 sec) . . . . . . . . . . +260

°C

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the ADG436 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

Table I. Truth Table

Logic

Switch A

Switch B

OFF

ORDERING GUIDE

Temperature

Package

Model

Range

Descriptions

Options

ADG436BN

– 40

°C to +85°C

Plastic DIP

N-16

ADG436BR

– 40

°C to +85°C

0.15" SOIC

R-16A

WARNING!

ESD SENSITIVE DEVICE

ADG436 bảng dữ liệu(PDF) 4 Page - Analog Devices

ADG436 bảng dữ liệu(HTML) 4 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8

bảng dữ liệu tải về

Link URL