AD843 datasheet(3/12 Pages) AD

3 / 12 page

AD843

REV. D

–3–

NOTES

1Standard Military Drawings Available: 5962-9098001M2A (SE/883B), 5962-9098001MXA (SH/883B), 5962-9098001MPA (SQ/883B).

2Specifications are guaranteed after 5 minutes at T

A = +25°C.

3Full power bandwidth = Slew Rate/2

πV peak.

4All “S” grade T

MIN-TMAX specifications are tested with automatic test equipment at T A = –55°C and TA = +125°C.

Specifications subject to change without notice.

Specifications in boldface are tested on all production units at final electrical test. Results from those tests are used to calculate outgoing quality levels. All min and

max specifications are guaranteed although only those shown in boldface are tested on all production units.

ABSOLUTE MAXIMUM RATINGS

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±18 V

Internal Power Dissipation

Plastic Package . . . . . . . . . . . . . . . . . . . . . . . . . . 1.50 Watts

Cerdip Package . . . . . . . . . . . . . . . . . . . . . . . . . 1.35 Watts

12-Pin Header Package . . . . . . . . . . . . . . . . . . . 1.80 Watts

16-Pin SOIC Package . . . . . . . . . . . . . . . . . . . . 1.50 Watts

20-Pin LCC Package . . . . . . . . . . . . . . . . . . . . . . 1.00 Watt

Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±V

Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite

Differential Input Voltage . . . . . . . . . . . . . . . . . . +VS and –VS

Storage Temperature Range (N, R) . . . . . . . –65

°C to +125°C

Storage Temperature Range (Q, H, E) . . . . –65

°C to +150°C

Operating Temperature Range

AD843J/R . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

°C to +70°C

AD843A/B . . . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

AD843S . . . . . . . . . . . . . . . . . . . . . . . . . . –55

°C to +125°C

Lead Temperature Range (Soldering 60 sec) . . . . . . . . +300

°C

ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 V

NOTES

1Stresses above those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device at these or any other conditions above those

indicated in the operational sections of this specification is not implied. Exposure

to absolute maximum rating conditions for extended periods may affect device

reliability.

28-Pin Plastic Package:

JA = 100°C/Watt

8-Pin Cerdip Package:

JA = 110°C/Watt

12-Pin Header Package:

JA = 80°C/Watt

16-Pin SOIC Package:

JA = 100°C/Watt

20-Pin LCC Package:

JA = 150°C/Watt

METALIZATION PHOTOGRAPH

Contact factory for latest dimensions.

Dimensions shown in inches and (mm).

AD843 bảng dữ liệu(PDF) 3 Page - Analog Devices

AD843 bảng dữ liệu(HTML) 3 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

bảng dữ liệu tải về

Link URL