AD811

REV. D

–3–

ABSOLUTE MAXIMUM RATINGS

1

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±18 V

AD811JR Grade Only . . . . . . . . . . . . . . . . . . . . . . . . .

±12 V

Internal Power Dissipation

Output Short Circuit Duration . . . . . Observe Derating Curves

Common-Mode Input Voltage . . . . . . . . . . . . . . . . . . . . .

±V

S

Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . .

±6 V

Storage Temperature Range (Q, E) . . . . . . . . –65

°C to +150°C

Storage Temperature Range (N, R) . . . . . . . . –65

°C to +125°C

Operating Temperature Range

AD811J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

°C to +70°C

AD811A . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

AD811S . . . . . . . . . . . . . . . . . . . . . . . . . . . –55

°C to +125°C

Lead Temperature Range (Soldering 60 sec) . . . . . . . . +300

°C

NOTES

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

θ

8-Lead Cerdip Package:

θ

8-Lead SOIC Package:

θ

16-Lead SOIC Package:

θ

20-Lead SOIC Package:

θ

20-Lead LCC Package:

θ

ORDERING GUIDE

Temperature

Package

Model

Range

Option*

AD811AN

–40

°C to +85°C

N-8

AD811AR-16

–40

°C to +85°C

R-16

AD811AR-20

–40

°C to +85°C

R-20

AD811JR

0

°C to +70°C

SO-8

AD811SQ/883B

–55

°C to +125°C

Q-8

5962-9313101MPA

–55

°C to +125°C

Q-8

AD811SE/883B

–55

°C to +125°C

E-20A

5962-9313101M2A

–55

°C to +125°C

E-20A

AD811JR-REEL

0

°C to +70°C

SO-8

AD811JR-REEL7

0

°C to +70°C

SO-8

AD811AR-16-REEL

–40

°C to +85°C

R-16

AD811AR-16-REEL7

–40

°C to +85°C

R-16

AD811AR-20-REEL

–40

°C to +85°C

R-20

AD811ACHIPS

–40

°C to +85°CDie

AD811SCHIPS

–55

°C to +125°CDie

*E = Ceramic Leadless Chip Carrier; N = Plastic DIP; Q = Cerdip; SO (R) =

Small Outline IC (SOIC).

MAXIMUM POWER DISSIPATION

The maximum power that can be safely dissipated by the

AD811 is limited by the associated rise in junction temperature.

For the plastic packages, the maximum safe junction tempera-

ture is +145

°C. For the cerdip and LCC packages, the maxi-

mum junction temperature is +175

°C. If these maximums are

exceeded momentarily, proper circuit operation will be restored

as soon as the die temperature is reduced. Leaving the device in

the “overheated” condition for an extended period can result in

device burnout. To ensure proper operation, it is important to

observe the derating curves in Figures 17 and 18.

While the AD811 is internally short circuit protected, this may

not be sufficient to guarantee that the maximum junction tem-

perature is not exceeded under all conditions. One important

example is when the amplifier is driving a reverse terminated

75

Ω cable and the cable’s far end is shorted to a power supply.

With power supplies of

±12 volts (or less) at an ambient tem-

perature of +25

°C or less, if the cable is shorted to a supply rail,

then the amplifier will not be destroyed, even if this condition

persists for an extended period.

ESD SUSCEPTIBILITY

ESD (electrostatic discharge) sensitive device. Electrostatic

charges as high as 4000 volts, which readily accumulate on the

human body and on test equipment, can discharge without

detection. Although the AD811 features proprietary ESD pro-

tection circuitry, permanent damage may still occur on these

devices if they are subjected to high energy electrostatic dis-

charges. Therefore, proper ESD precautions are recommended

to avoid any performance degradation or loss of functionality.

METALIZATION PHOTOGRAPH

Contact Factory for Latest Dimensions.

Dimensions Shown in Inches and (mm).

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the AD811 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE