RK-WI.232FHSS-25-FCC-R datasheet(43/67 Pages) RADIOMETRIX

43 / 67 page

WI.232FHSS-25-R/ WI.232FHSS-250-R DATASHEET

Revision 1.1.0

Default User Destination ID[1]: 0xFF

When user-extended addressing is selected, this is byte 1 of the 32-bit user-extended destination address;

when user addressing is selected, it is the most significant byte of the user destination address. When

extended-user addressing is selected, this register is used in conjunction with User Destination ID[3-2] and

User Destination ID[0] registers to direct a transmitted packet to the proper endpoint(s). When user

addressing is selected, this register is used in conjunction with the User Destination ID[0] register to direct

a transmitted packet to the proper endpoint(s). For more information on the operation of addressing

modes, please refer to the Addressing Modes section of this document.

4.1.17. User Destination ID[0] (regUSERDESTID[0])

regNVUSERDESTID[0] (0x12)

regUSERDESTID[0] (0x5D)

R/W

Default User Destination ID[0]: 0xFF

When user-extended addressing is selected, this is the least significant byte of the 32-bit extended-user

destination address; when user addressing is selected, it is the least significant byte of the user destination

address. When user-extended addressing is selected, this register is used in conjunction with User

Destination Address[3-1] registers to direct a transmitted packet to the proper endpoint(s). When user

addressing is selected, this register is used in conjunction with the User Destination Address[1] register to

direct a transmitted packet to the proper endpoint(s). For more information on the operation of addressing

modes, please refer to the Addressing Modes section of this document.

4.1.18. User Source ID[3] (regUSERSRCID[3])

regNVUSERSRCID[3] (0x13)

regUSERSRCID[3] (0x5E)

R/W

Default User Source ID[3]: 0xFF

When user-extended addressing is selected, this register holds the most significant byte (byte 3) of the 32-

bit user-extended source address. When Extended User addressing is invoked, this register is used in

conjunction with User Source Address[2-0] registers to make up the module’s 32-bit user-extended source

address. For more information on the operation of addressing modes, please refer to the Addressing

Modes section of this document.

RK-Wi.232FHSS-25-FCC-R bảng dữ liệu(PDF) 43 Page - Radiometrix Ltd