DATASHEET

Office Lighting

Stripe

5

Copyright © 2010, Everlight All Rights Reserved. Release Date : 5.5.2011. Issue No:

www.everlight.com

Application Notes

To ensure optimal performance of the OL-Stripe series Office Lighting, operation within

parameters of this datasheet and understanding of the internal components is crucial.

LED T5 Tube

The light source of the OL-Stripe series is suggested the Everlight LED T5 Cobra light tube.

Everlight LED T5 Cobra light tube with AC power input may be hazardous and result in failure.

The Everlight LED T5 Cobra in the OL-Stripe can only be replaced by an equivalent Everlight

LED T5 Cobra. This will greatly reduce the possibility of incompatible light sources that may be

hazardous and result in failure.

When installing the Everlight LED T5 Cobra, please ensure that pins are properly placed within

the socket and turned a full 90°. This will ensure optimal light output and performance.

The lens of the Everlight LED T5 Cobra is composed of standard polycarbonate material.

Unnecessary pressure or bending of the lens may result in puncturing or cracking the surface.

Please handle with care.

Although the Everlight LED T5 Cobra is fitted with an aluminum heat sink, proper airflow will

ensure optimal performance and lifetime.

Power Supply

The power supply is an AC to DC power transfer device rated at 12.5 W and 25.4 W that has

the capability to deliver an output of 48 VDC with a standard rated current of 0.24A and 0.48A.

The input is rated at 100-240VAC 50/60Hz with a range capability of up to 90-264VAC 47-63Hz.

The current max achievable is 0.26 A and 0.53 A. Two pins each are reserved for both input and

output power of the power supply. Please see the diagram below for pin configuration of the PSU.

Pin Layout

Section

Pin

Description

Conn1

L

Input

N

Input

Conn2

V-

Gnd

V+

Output