AD28msp02

REV. 0

–11–

SPECIFICATIONS

RECOMMENDED OPERATING CONDITIONS

K Grade

B Grade

Parameter

Min

Max

Min

Max

Unit

Supply Voltage

4.50

5.50

4.50

5.50

V

Ambient Operating Temperature

0

+70

–40

+85

°C

Refer to Environmental Conditions for information on case temperature and thermal specifications.

ABSOLUTE MAXIMUM RATINGS*

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V

Operating Temperature Range (Ambient) . . . –40

°C to +85°C

Storage Temperature Range . . . . . . . . . . . . . –55

°C to +150°C

Lead Temperature (5 sec) SOIC . . . . . . . . . . . . . . . . . +280

°C

*Stresses above those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device. These are stress rating only and functional

operation of the device at these or any other conditions above those indicated in the

operational sections of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

ESD SENSITIVITY

The AD28msp02 features proprietary input protection circuitry to dissipate high-energy discharges

(Human Body Model). Per method 3015 of MIL-STD-883C, the AD28msp02 has been classified as

a Class 1 device.

Proper ESD precautions are strongly recommended to avoid functional damage or performance

degradation. Charges readily accumulate on the human body and test equipment and discharge without

detection. Unused devices must be stored in conductive foam or shunts, and the foam should be

discharged to the destination socket before devices are removed.

WARNING!

ESD SENSITIVE DEVICE