Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate

the performance, characteristics, and functions of the described products in the independent state, and are not

guarantees of the performance, characteristics, and functions of the described products as mounted in the

customer

device, the customer should always evaluate and test devices mounted in the customer

equipment.

Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to

"standard application", intended for the use as general electronics equipment. The products mentioned herein

shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,

aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,

safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives

in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any

guarantee thereof. If you should intend to use our products for new introduction or other application different

from current conditions on the usage of automotive device, communication device, office equipment, industrial

equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the

intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely

responsible for the use.

92612NKPC 20120830-S00003 No.A2122-1/14

LV5686PVC

Overview

LV5686PVC is a multiple voltage regulator for Car Audio System. This IC has 3 voltage regulators, 5V output for a

microcontroller, 9.85V output for illuminations, 9V output for audio control and 6 high side switches.

About protection circuits, it has Over-current-protection, Over-voltage-protection and Thermal-shut-down. This IC is

most suitable for Car Audio System.

Features

• 3 system regulators

VDD (MCU) : VOUT 5V, IOUT max 300mA, reverse current prevention.

Illumination : VOUT 9.85V, IOUT max 300mA

Audio

: VOUT 9.0V, IOUT max 500mA

• 6 high side switches

AMP : IOUT max 300mA, voltage difference between input and output: 1.0V

ANT : IOUT max 300mA, voltage difference between input and output: 1.0V

EXT1 : IOUT max 500mA, voltage difference between input and output: 1.0V

EXT2 : IOUT max 500mA, voltage difference between input and output: 1.0V

EXT3 : IOUT max 350mA, voltage difference between input and output: 0.5V

EXT4 : IOUT max 500mA, voltage difference between input and output: 1.0V

• Over Current Protection

• BATT. Detection: under voltage1 (<6.5V), under voltage2 (<9.5V) and over voltage (>18V)

• Over Voltage Protection Typ 25V (shutdown except VDD)

• Thermal Shut Down Circuit Typ 175°C

• Applied P-LDMOS to Output stage

(Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the

conditions out of safety range or ratings. Use of the IC such as use under overcurrent protection range, thermal shutdown

state or V6IN OVS condition may degrade the IC’s reliability and eventually damage the IC.

Bi-CMOS LSI

For Car Audio Systems

Multi-Power Supply IC

Ordering number : ENA2122