| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
RT9136 bảng dữ liệu(PDF) 5 Page - Richtek Technology Corporation |
|
|
|||||||||||||||||||||||||||||
RT9136 bảng dữ liệu(HTML) 5 Page - Richtek Technology Corporation |
|
5 / 11 page ![]() RT9136 5 DS9136-03 June 2011 www.richtek.com (VS+ = 7.5V, VS- = −7.5V, RL = 10kΩ and CL = 10pF, TA =25°C, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Input Characteristics Input Offset Voltage VOS VCM = 0V -- 2 21 mV Average Offset Voltage Drift ΔVOS/ΔT −40°C≦TA≦85°C -- 5 -- μV/°C Input Bias Current IB VCM = 0V -- 2 50 nA Input Impedance RIN -- 1 -- G Ω Input Capacitance CIN -- 1.35 -- pF Open-Loop Gain AVOL 0.5V≦VOUT≦4.5V 75 95 -- dB Output Characteristics Output swing Low VOL IL = -5mA -- −4.92 −4.85 V Output swing High VOH IL = 5mA 4.85 4.92 -- V Short Circuit Current ISCC -- ±150 -- mA Power Supply Power Supply Rejection Ratio PSRR VS is moved from ±2.25V to ±7.75V 50 70 -- dB Supply Current/Amplifier ISY No Load -- 500 850 μA Dynamic Performance Slew Rate (Note 6) SR −4V≦VOUT≦4V, 20% to 80% -- 20 -- V/ μs Setting to ±0.1% (AV = 1) tS (AV = 1), VOUT = 2V step -- 500 -- ns −3dB Bandwidth BW RL = 10kΩ, CL =10 pF -- 12 -- MHz Channel Separation CS f = 5MHz -- 75 -- dB Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability. Note 2. θJA is measured in the natural convection at TA = 25°C on a high effective thermal conductivity test board (4-Layers, 2S2P) of JEDEC 51-7 thermal measurement standard. Note 3. Devices are ESD sensitive. Handling precaution is recommended. Note 4. The device is not guaranteed to function outside its operating conditions. Note 5. 16.5V is the correct allowable aging voltage; however, full electrical characteristics are specified with a single nominal supply voltage from 5V to 15V or a split supply with its total range from 5V to 15V. Note 6. Slew rate is measured on rising and falling edges. |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |