SPZB260-PRO

FCC statement

Doc ID 15614 Rev 1

13/15

7.

The modular transmitter must comply with any specific rule or operating requirements

applicable to the transmitter and the manufacturer must provide adequate instructions

along with the module to explain any such requirements:

The EUT is compliant with all applicable FCC rules. Detail instructions are given in the

product users guide.

8.

The modular transmitter must comply with any applicable RF exposure requirements.

–

Maximum measured power output: 3,08 mW

–

Maximum antenna gain: 0,6 dBi = numeric gain 1,148 (see also FCC test report)

Maximum permissible exposure defined in 47 CFR 1.1310: 1 mW/cm².

The RF module operates at low power level so it does not exceed the commission’s RF

exposure guidelines limits; furthermore, spread spectrum transmitters operate according to

the section 15.247 are categorically excluded from routine environmental evaluation.