STA339BWS_11 datasheet(20/76 Pages) STMICROELECTRONICS

20 / 76 page

I2C bus specification

STA339BWS

20/76

Doc ID 15276 Rev 5

5.3

Write operation

Following the START condition the master sends a device select code with the RW bit set

to 0. The STA339BWS acknowledges this and then waits for the byte of internal address.

After receiving the internal byte address the STA339BWS again responds with an

acknowledgement.

5.3.1

Byte write

In the byte write mode the master sends one data byte, this is acknowledged by the

STA339BWS. The master then terminates the transfer by generating a STOP condition.

5.3.2

Multi-byte write

The multi-byte write modes can start from any internal address. The master generating a

STOP condition terminates the transfer.

Figure 8.

Write mode sequence

5.4

Read operation

5.4.1

Current address byte read

Following the START condition the master sends a device select code with the RW bit set

to 1. The STA339BWS acknowledges this and then responds by sending one byte of data.

The master then terminates the transfer by generating a STOP condition.

5.4.2

Current address multi-byte read

The multi-byte read modes can start from any internal address. Sequential data bytes are

read from sequential addresses within the STA339BWS. The master acknowledges each

data byte read and then generates a STOP condition terminating the transfer.

5.4.3

Random address byte read

Following the START condition the master sends a device select code with the RW bit set

to 0. The STA339BWS acknowledges this and then the master writes the internal address

byte. After receiving, the internal byte address the STA339BWS again responds with an

acknowledgement. The master then initiates another START condition and sends the device

select code with the RW bit set to 1. The STA339BWS acknowledges this and then

responds by sending one byte of data. The master then terminates the transfer by

generating a STOP condition.

DEV-ADDR

ACK

START

SUB-ADDR

ACK

DATA IN

ACK

STOP

BYTE

WRITE

DEV-ADDR

ACK

START

SUB-ADDR

ACK

DATA IN

ACK

STOP

MULTIBYTE

WRITE

DATA IN

ACK

STA339BWS bảng dữ liệu(PDF) 20 Page - STMicroelectronics

STA339BWS bảng dữ liệu(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

bảng dữ liệu tải về

Link URL