AC axial compact fan

AC 3200 JH

Technical features

General description

Particular design features:

Can be used universally for all supply voltages between 85 and 265 VAC.

Fan speed independent of the power frequency.

Significantly reduced power consumption compared to conventional AC fans.

Open loop speed control, sensor and alarm signal available on request.

Rigid compression curve for high air flow at high counterpressure.

Innovative impeller with winglets for low noise.

General features:

Material: fibreglass-reinforced plastic. Impeller made of PA, housing PBTP.

Electronic commutation completely integrated. Protected against locking.

Connection via single strands AWG 22, TR 64, bared and tin-plated.

Air exhaust over bars. Rotational direction clockwise looking at rotor.

Mass: 325 g.

Mass

0.325 kg

Dimensions

92 x 92 x 38 mm

Material of impeller

Fiberglass-reinforced PA plastic

Housing material

Fiberglass-reinforced PBTP plastic

Direction of air flow

Air exhaust over bars

Direction of rotation

Right, looking at rotor

Type of protection

IP 20

Bearing

Ball bearings

Lifetime L10 at 40 °C

70000 h

Lifetime L10 at maximum

temperature

35000 h

Connection line

Single strands AWG 22, TR 64, bared and tin-plated.

Motor protection

Protected against blocking.

Approval

VDE, CSA, UL, CCC, CE

Web data sheet D · Page 2 of 4

ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Straße 1 · D-78112 St. Georgen · Phone +49 7724 81-0 · Fax +49 7724 81-1309 · info2@de.ebmpapst.com · www.ebmpapst.com