www.ti.com

Getting Started

3

Getting Started

Figure 1 highlights the user interface items associated with the EVM. The polarized V

block is used for connection to the host input supply and the polarized V

for connection to the load. The terminal blocks can except up to 16 AWG wire.

The V

used as voltage monitoring points where voltmeters can be connected to measure V

voltmeter references should be connected to any of the four V

between the power terminal blocks. Do not use these V

supply or output load connection points. The PCB traces connecting to these test points are not designed

to support high currents.

Figure 1. TPS84x10EVM-00x User Interface

3

SLUU633A

– September 2011 – Revised February 2012

TPS84410EVM-001/TPS84210EVM-002/TPS84610EVM-003, 2-A to 6-A

Integrated Power Solution

Submit Documentation Feedback

Copyright

© 2011–2012, Texas Instruments Incorporated