| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCP7952X bảng dữ liệu(PDF) 13 Page - Micro Analog systems |
|
|
|||||||||||||||||||||||||||||
MCP7952X bảng dữ liệu(HTML) 13 Page - Micro Analog systems |
|
13 / 50 page ![]() 2012 Microchip Technology Inc. Preliminary DS22300A-page 13 MCP7952X/MCP7951X REGISTER 5-4: HOUR 0X03 R/W R/W R/W R/W R/W CALSGN 12/24 10 Hour AM/PM 10 Hour Hour bit 7 bit 6 bit 5 bit 4 bit 3 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ bit 7 CALSGN: Calibration Sign bit Bit 7 is the sign bit (CALSGN) for the calibration. Clearing this bit produces a positive calibration, setting this bit produces a negative calibration. bit 6 12/24: Clearing this bit to ‘0’ enables 24-hour format, setting this bit to ‘1’ enables 12-hour format. bit 5 10 HOUR: AM/PM bit for 12-hour time bit 4 10 HOUR bit 3-0 HOUR<3:0> Note 1: Contains the BCD hour in bits <3:0>. Bits <5:4> contain either the 10-hour in BCD for 24-hour format or the AM/PM indicator and the 10-hour bit for 12-hour format. Bit 5 determines the hour format. REGISTER 5-5: DAY 0X04 U-0 U-0 R R/W R/W R/W — — OSCON VBAT VBATEN Day bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ bit 7-6 Unimplemented: Read as ‘0’ bit 5 OSCON: Oscillator On bit This bit is set and cleared by hardware. If this bit is set, the oscillator is running; if clear, the oscillator is not running. This bit does not indicate that the oscillator is running at the correct frequency. The bit will wait 32 oscillator cycles before the bit is set. bit 4 VBAT: External Battery Switched Flag bit This bit is set by hardware when the VCC fails and the VBAT is used to power the oscillator and the RTCC registers. This bit is cleared by software. bit 3 VBATEN: External Battery Enable bit If this bit is set the internal circuitry is connected to the VBAT pin. If this bit is ‘0’ then the VBAT pin is disconnected and the only current drain on the external battery is the VBAT pin leakage. bit 2-0 DAY<2:0> Note 1: Contains the BCD day. The range is 1-7. Also, additional bits are used for configuration and status. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |