ABSOLUTE MAXIMUM RATINGS

(1)

PCM2906B

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

SPECIFIED

TRANSPORT

PACKAGE

TEMPERATURE

PACKAGE

ORDERING

MEDIA,

PRODUCT

PACKAGE-LEAD

DESIGNATOR

RANGE

MARKING

NUMBER

QUANTITY

PCM2906BDB

Rails, 47

PCM2906BDB

SSOP-28

DB

–25°C to +85°C

PCM2906B

Tape and Reel,

PCM2906BDBR

2000

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

Over operating free-air temperature range (unless otherwise noted).

PARAMETER

PCM2906B

UNIT

–0.3 to 6.5

V

Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU

±0.1

V

SEL0, SEL1, DIN

–0.3 to 6.5

Digital input

V

voltage

D+, D–, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND

Analog input

V

voltage

–0.3 to 4

Input current (any pins except supplies)

±10

mA

Ambient temperature under bias

–40 to +125

°C

–55 to +150

°C

+150

°C

Lead temperature (soldering, 5s)

+260

°C

Package temperature (IR reflow, peak)

+250

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under is not implied. Exposure to

absolute-maximum-rated conditions for extended periods may affect device reliability.

2

Submit Documentation Feedback

Copyright © 2008, Texas Instruments Incorporated

Product Folder Link(s): PCM2906B

Not Recommended for New Designs