| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
THS7103CVFPR bảng dữ liệu(PDF) 5 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
THS7103CVFPR bảng dữ liệu(HTML) 5 Page - Texas Instruments |
|
5 / 9 page ![]() THS7103 SLOS387 − DECEMBER 2001 5 www.ti.com driver characteristics, VCCL = VCCOPx = 15 V, VCCON = GND, RS = 1.35 Ω, N = 1, RL = 27 Ω†, Ci = 0.1 µF, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT RIN−Tx Input resistance (single-ended) 1.13 1.16 1.19 k Ω VA Output voltage f = 1 MHz, THD ≤ −31 dBc 23.8 24.4 Vpp VA/VIN f = 1 MHz 19.0 19.5 19.8 dB VA/VIN Gain (see Note 3 and Figure 1) f ≅ 270 kHz (Peak frequency) 22.2 22.5 22.8 dB VB/VIN Gain (see Note 3 and Figure 1) f = 1 MHz 18.2 18.7 19 dB VB/VIN f ≅ 270 kHz (Peak frequency) 21.4 21.7 22 dB Differential output noise 200 kHz 85 nV/ √Hz Zo Output impedance‡ f = 20 kHz to 1.1 MHz † Ω Filter corner frequency HPF, Ci = 0.1 µF 178 190 202 kHz Filter corner frequency LPF 1.15 1.4 1.65 MHz Out of band rejection (relative to the input signal) VO at f = 40 kHz, Ci = 0.1 µF −10 −14 dB Out of band rejection (relative to the input signal) VO at f = 6 MHz −17.5 −20.5 dB Channel-to-channel mismatch f = 200 kHz to 800 kHz −0.15 0 0.35 dB Channel-to-channel mismatch f = 900 kHz to 1.1 MHz −0.15 0.2 0.5 dB Off, TXEN1 = 0, TXEN2 = 0 0.7 1 1.3 ICCL Supply current Low, TXEN1 = 1, TXEN2 = 0 13.1 14.6 16.1 mA ICCL Supply current Med., TXEN1 = 1, TXEN2 = 1 13.3 14.8 16.3 mA High, TXEN1 = 0, TXEN2 = 1 13.5 15 16.5 Off, TXEN1 = 0, TXEN2 = 0 0 0.6 1.1 ICCOP Supply current Low, TXEN1 = 1, TXEN2 = 0 1.7 2.7 3.7 mA ICCOP Supply current Med., TXEN1 = 1, TXEN2 = 1 6 7.5 9 mA High, TXEN1 = 0, TXEN2 = 1 11 13 15 † The test circuit of RS = 1.35 Ω, N = 1, and RL = 27 Ω is equivalent to a standard ADSL circuit with RS = 1.35 Ω, N = 1.9, and RL = 100 Ω. ‡ Output impedance is given by Zo = 10 × RS. NOTES: 3. Due to the gain of the transmit path, the maximum input voltage should not exceed 3 Vpp or clipping and distortion occurs. receiver characteristics, VCCL = VCCOPx = 15 V, VCCON = GND, RS = 1.35 Ω, N = 1, RL = 3.9 kΩ, RF = 5 kΩ, Gain = 26 dB, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT VO Output voltage VI = 1 Vpp, f = 200 kHz 19 20 Vpp Output noise At f = 200 kHz 73 nV/ √Hz Vn Noise voltage (preamp input noise) f = 20 kHz 2.3 nV/ √Hz In Noise current (preamp input noise) f = 20 kHz 1.0 pA/ √Hz Filter corner frequency VI = 0.5 Vpp 223.7 238 252.3 kHz Out of band rejection (relative to input point A) See Figure 1 VO at f = 400 kHz −6 dB In-band ripple VO at f = 55 kHz and 103.5 kHz 0.2 0.5 dB Channel-to-channel mismatch f = 10 kHz to 145 kHz −0.15 0 0.15 dB |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |