| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SP507 bảng dữ liệu(PDF) 17 Page - Sipex Corporation |
|
|
|||||||||||||||||||||||||||||
SP507 bảng dữ liệu(HTML) 17 Page - Sipex Corporation |
|
17 / 28 page ![]() 17 Rev: A Date:1/27/04 SP507 Multi–Mode Serial Transceiver © Copyright 2004 Sipex Corporation Pin 45 — RL(b) — Remote Loopback; analog output, non-inverted; sourced from RL. Pin 47 — RL(a) — Remote Loopback; analog output inverted; sourced from RL. Pin 49— LL(b) — Local Loopback; analog output, non-inverted; sourced from LL. Pin 51 — LL(a) — Local Loopback; analog output, inverted; sourced from LL. Pin 52 — RS(b) — Ready To Send; analog output, non-inverted; sourced from RTS. Pin 54 — RS(a) — Ready To Send; analog output, inverted; sourced from RTS. Pin 56 — TR(b) — Terminal Ready; analog output, non-inverted; sourced from DTR. Pin 58 — TR(a) — Terminal Ready; analog output, inverted; sourced from DTR. Pin 66 — CS(a)— Clear To Send; analog input, inverted; source for CTS. Pin 67 — CS(b)— Clear To Send; analog input, non-inverted; source for CTS. Pin 68 — DM(a)— Data Mode; analog input, inverted; source for DSR. Pin 69 — DM(b)— Data Mode; analog input, non-inverted; source for DSR Pin 78 — DSR— Data Set Ready; TTL output; sourced from DM(a) and DM(b) inputs. Pin 80 — CTS— Clear To Send; TTL output; sourced from CS(a) and CS(b) inputs. CONTROL REGISTERS Pin 2 — RTEN — Enables RxC receiver, active low; TTL input. Pin 3 — RREN — Enables DCD receiver, active low; TTL input. Pin 4 — TMEN — Enables TM receiver, active high; TTL input. Pin 5 — LLEN — Enables LL driver, active low; TTL input. Pin 6 — TTEN — Enables TxCE driver, active high; TTL input. Pin 7 — SCTEN — Enables DTE_ST receiver; active low; TTL input. Pin 8 — LATCH — Latch control for decoder bits (pins 10-12), active low. Logic high input will make decoder transparent. Pin 9 — TERM_OFF — Disables receiver termination networks for RxD, RxC, and DTE_ST; TTL input. Pins 10,11, 12 — M2, M1, M0 — Transmitter and receiver decode register; configures transmitter and receiver modes; TTL inputs. Pin 18 — RLEN — Enables RL driver; active high; TTL input. Pin 23 — STEN — Enables DTE_ST driver; active high; TTL input. POWER SUPPLIES Pins 25, 33, 41, 48, 55, 62, 73, 74 — V CC — +5V input. Pins 29, 34, 43, 46, 50, 53, 57, 60, 64, 72, 75 — GND — Ground. Pin 27 — V DD +10V Charge Pump Capacitor — Connects from V DD to V CC. Suggested capacitor size is 22 µF, 16V. Pin 32 — V SS –10V Charge Pump Capacitor — Connects from ground to V SS. Suggested capacitor size is 22 µF, 16V. Pins 26 and 30 — C 1 + and C 1 – — Charge Pump Capacitor — Connects from C 1 + to C 1 –. Suggested capacitor size is 22 µF, 16V. Pins 28 and 31 — C 2 + and C 2 – — Charge Pump Capacitor — Connects from C 2 + to C 2 –. Suggested capacitor size is 22 µF, 16V. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |