P-DSO-14-4

P-DSO-20-6

1-A Dual-HBD (Dual-Half-Bridge Driver)

TLE 4207

Semiconductor Group

1

1998-02-01

Overview

Features

• Delivers up to 0.8 A continuous

• Optimized for DC motor management applications

• Very low current consumption

in stand-by (Inhibit) mode

• Low saturation voltage

°C; 0.4 A

• Output protected against short circuit

• Error flag diagnosis

• Overvoltage lockout and diagnosis

• Undervoltage lockout

• CMOS/TTL compatible inputs with hysteresis

• No crossover current

• Internal clamp diodes

• Overtemperature protection with hysteresis

and diagnosis

• Enhanced power P-DSO-Package

Description

The TLE 4207 is a fully protected Dual-Half-Bridge-Driver designed specially for

automotive and industrial motion control applications.

The part is built using the Siemens bipolar high voltage power technology DOPL.

The actuator (DC motor) can be connected direct between the halfbridges. Operation

modes forward (cw), reverse (ccw), brake and high impedance are invoked from a

standard interface. The standard enhanced power P-DSO-14 package meets the

application requirements and saves PCB-board space and costs.

Furthermore the built in features like diagnosis, over- and undervoltage-lockout, short-

circuit-protection, over-temperature-protection and the very low quiescent current in

stand-by mode will open a wide range of automotive and industrial applications.

Type

Ordering Code

Package

TLE 4207 G

Q67006-A9275

P-DSO-14-4

TLE 4207 GL

on request

P-DSO-20-6