09/2008

157

Loose

Taped

Fig.1

Fig.2

Insulated rigid leads

Ø d ±0.05

P= 22.5 to 27.5

p = 37.5

0.8

1

All dimensions are in mm.

GeneRAl TeCHniCAl dATA

dielectric: polypropylene film.

Plates: metal layer deposited by evaporation under vacuum.

Winding: non-inductive type.

leads: tinned wire.

Protection: plastic case, thermosetting resin filled.

Box material is solvent resistant and flame retardant according to

UL94 V0.

marking: Manufacturer’s logo, series, capacitance, tolerance,

rated voltage, capacitor class, dielectric code, climatic category,

passive flammability category, manufacturing date code, approvals,

manufacturing plant.

Climatic category: 40/110/56 IEC 60068-1

operating temperature range: -40 to +110°C

Related documents:

IEC 60384-14, EN 60384-14.

eleCTRiCAl CHARACTeRiSTiCS

Rated voltage (V

275Vac (50/60Hz) / 560 Vdc

300Vac (50/60Hz) / 630 Vdc

Capacitance range:

Capacitance values: E6 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±

dissipation factor (dF):

≤

10 (6)* at 1kHz*

Typical value

insulation resistance:

Test conditions

Temperature:

Voltage charge time:

1 min

Voltage charge:

100 Vdc

Performance

≥

≥

* Typical value

Test voltage between terminations (on all pieces):

R.46+R

Capacitors with discharge resistor

X2 CLASS (IEC 60384-14) - MKP Series

meTAllized PolYPRoPYlene Film CAPACiToR

SELF-HEALING PRoPERTIES

Typical applications: interference suppression and

«across-the-line» applications. Suitable for use in situations

where failure of the capacitor would not lead to danger of

electric shock.

PRoDUCT CoDE:

R46

Pitch Box thickness (B)

Maximum dimensions (mm)

(mm)

(mm)

B max

H max

L max

22.5

All

B +0.2

H +0.1

L +0.3

27.5

All

B +0.2

H +0.1

L +0.3

37.5

All

B +0.3

H +0.1

L +0.3

TeST meTHod And PeRFoRmAnCe

damp heat, steady state:

Test conditions 1st

Temperature:

Relative humidity (RH):

Test duration:

56 days

Performance

Dielectric strength:

no dielectric breakdown or

flashover at 4.3 x V

Insulation resistance:

≥

50% of initial limit.

endurance:

Test conditions

Temperature:

Test duration:

1000 h

Voltage applied:

1.25 x V

Performance

Dielectric strength: no dielectric breakdown or

flashover at 4.3 x V

Insulation resistance:

≥

50% of initial limit.

Resistance to soldering heat:

Test conditions

Performance

APPRoVAlS

ENEC

IEC 60384-14

Class X2

File No.V4413

UL 1283

(310Vac-105°C)

Electromagnetic

Interference

Filters

File No.E85238

CSA - C22.2 No.8

(310Vac-105°C)

Electromagnetic

Interference

Filters certified

for Canada

File No.E85238

Approved according to IEC 60384-14

According to IEC 60065.

Not for use in series with the mains.

See www.kemet.com for more information.