Long Stroke Tactile Switch

B3AL

3

Operation

• Do not repeatedly operate the Switch with excessive force.

Applying excessive pressure or applying additional force after the

plunger has stopped may deform the disk spring of the Switch,

resulting in malfunction.

• Be sure to set up the Switch so that the plunger will operate in a

straight vertical line. If the plunger is pressed off-center or from an

angle it may cause deformation or damage to some parts.

• We recommend using a round bar with a diameter of at least 3 mm

as the actuator.

Dust Countermeasures

Do not mount or use the Switch in areas that are subject to dust.

If dust is unavoidable, protect the Switch with a sheet or other

countermeasure.

Water and Drip Resistance

The switch is not water or drip resistant.

Do not use it in locations subject to water.

Common Precautions

Be sure to read the precautions common to all Tactile Switches, con-

tained in the Technical User’s Guide, “Tactile Switches, Technical

Information” for correct use.