| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TS3011 bảng dữ liệu(PDF) 4 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TS3011 bảng dữ liệu(HTML) 4 Page - STMicroelectronics |
|
4 / 14 page ![]() Electrical characteristics TS3011 4/14 Doc ID 022078 Rev 1 Table 4. VCC =+2.7V, VICM =VCC/2, Tamb = +25°C (unless otherwise specified) (1) Symbol Parameter Test conditions Min. Typ. Max. Unit VIO Input offset voltage(2) -40°C < Tamb < +125°C -7 -9 -0.1 7 9 mV ΔVIO Input offset voltage drift -40°C < Tamb < +125°C 5 20 μV/°C VHYST Input hysteresis voltage (3) 2mV IIO Input offset current(4) -40°C < Tamb < +125°C 120 100 pA IIB Input bias current -40°C < Tamb < +125°C 120 100 pA ICC Supply current No load, output high -40°C < Tamb < +125°C No load, output low -40°C < Tamb < +125°C 0.52 0.66 0.65 0.9 0.89 1.1 mA ISC Short circuit current Source Sink 24 19 27 22 mA VOH Output voltage high Isource =4 mA -40°C < Tamb < +125°C 2.48 2.40 2.52 V VOL Output voltage low Isink = 4 mA -40°C < Tamb < +125°C 130 170 220 mV CMRR Common mode rejection ratio 0 < VICM < 2.7 V 52 70 dB TPLH Propagation delay(5) low to high output level CL = 12 pF, RL = 1 MΩ Overdrive = 5 mV Overdrive = 15 mV Overdrive = 50 mV 16 11 913 ns TPHL Propagation delay(6) high to low output level CL = 12 pF, RL = 1 MΩ Overdrive = 5 mV Overdrive = 15 mV Overdrive = 50 mV 16 11 913 ns TR Rise time (10% to 90%) CL = 12 pF, RL = 1 MΩ Overdrive = 100 mV 2.3 ns TF Fall time (90% to 10%) CL = 12 pF, RL = 1 MΩ Overdrive = 100 mV 1.8 ns 1. All values over the temperature range are guaranteed through correlation and simulation. No production tests are performed at the temperature range limits. 2. The offset is defined as the average value of positive (VTRIP+) and negative (VTRIP-) trip points (input voltage differences requested to change the output state in each direction. 3. Hysteresis is a built-in feature of the TS3011. It is defined as the voltage difference between the trip points. 4. Maximum values include unavoidable inaccuracies of the industrial tests. 5. Overdrive is measured with reference to the VTRIP+ point. 6. Overdrive is measured with reference to the VTRIP- point. |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |