44-602 Side Mounting Liquid Level Controls

21

3.5

Replacement Parts

3.5.3 Models T62 Threaded, T62 Flanged, T67 Threaded and T67 Flanged

T62 Threaded

T62 Flanged

T67 Threaded

T67 Flanged

Switch hsg cover

Refer to Bulletin 42-680/42-780 for switch housing cover and base assembly

Switch hsg base

Refer to Bulletin 42-680/42-780 for switch housing cover and base assembly

Switch mechanism

Refer to bulletin on switch mechanism furnished (refer to chart on page 7)

Spacer bracket

Not required

005-7542-121

Rd head screws

Not required

010-1409-006

Standard sleeve assy

Œ

(includes items 6 through 16)

089-5510-001

089-5511-001

Sheathed sleeve assy

Œ

(includes items 6 through 16)

089-5514-001

N/A

N/A

Float

2.50

089-5546-001

2.50 x 4.00

089-5553-001

3.00

089-5551-001

3.50

089-5552-001

3.00 x 5.00

089-5554-001

3.00 x 6.00

089-5555-001

Body

Consult Factory

E-tube gasket

012-1301-002

Enclosing tube

Z32-6325-001 

Z32-6325-007

Flange gasket

Not Required

Not Available

Ž

Not Required

Not Available

Ž

NOTES:

All replacement assemblies listed are for standard base models which use Series B, C, D, F, 8, 9 and J switch

mechanisms only. Consult your local representative for ordering assistance on all special model replacement parts

not listed above.

ΠSleeve kits contain 8.00 inch (203 mm) stem lengths. Consult factory for longer stem lengths. Standard sleeve

is type 400 series stainless steel. Sheathed attraction sleeves are used on models specified for corrosive

service. Sheathed sleeve kits are used on models with material of construction codes 2 through 9.

 This e-tube is for models with material of construction code 1 only. Consult factory for e-tubes used with other

material of construction codes.

Ž Flange gaskets used on models T62 and T67 are standard ANSI type, readily available at local supply houses.