8AA2A2006 datasheet(5/20 Pages) MAGNETROL

5 / 20 page

H E A T

E X T E N S I O N

200

100

110

120

130

140

150

160

400

600

800

1000

HEAT DISSIPATION GRAPH

For use with Heat extension (89-6593-001)

The heat dissipation graph, at left,

depicts the maximum temperatures at

which

the

extension

can

used

effectively.

1. Determine the maximum process

temperature in the application and

locate on X axis.

2. Determine the maximum ambient

temperature surrounding the heat

extension and locate on the Y axis.

3. If the intersecting point on the

graph is within the shaded area

the heat extension will dissipate

enough

heat

keep

the

electronics

temperature

below

+160° F (+70° C).

NOTE: The heat extension may be used with all rigid

probe configurations and flexible probe configura-

tion 8A2-AA1A-0XX. The heat extension can not be

used with guarded probes.

10"

(254 mm)

Process temperature ° F

F L E X I B L E

P R O B E S

Insulated flexible and bare flexible probes

Rigid probes longer than 10 feet (3 m) are difficult to

install and to physically move in the field. Flexible

probes are the ideal solution for measuring ranges

from 10 feet (3 m) up to 150 feet (45 m).

Insulated flexible probes can be used with either con-

ductive

non-conductive

media.

Bare

flexible

probes can only be used with non-conductive media.

Always verify that the selected electronics is powerful

enough to operate at these longer distances.

8AA2A2006 bảng dữ liệu(PDF) 5 Page - Magnetrol International, Inc.

8AA2A2006 bảng dữ liệu(HTML) 5 Page - Magnetrol International, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

bảng dữ liệu tải về

Link URL