12 - 13

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

12

Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.

Part Number

Package Body Material

Lead Finish

MSL Rating

HMC926LP5E

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

MSL1

[2]

H926

XXXX

[1] 4-Digit lot number XXXX

[2] Max peak reflow temperature of 260 °C

Package Information

HMC926LP5E

v00.0810

0.5 dB LSB 6-BIT DIGITAL

VARIABLE GAIN AMPLIFIER, 700 - 2700 MHz