For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

10

10 - 13

evaluation Pcb

the circuit board used in the application should use RF circuit design techniques. signal lines should have

50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the

ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and

bottom ground planes. the evaluation circuit board shown is available from Hittite upon request.

HMC795LP5E

v00.0409

SiGe Wideband direct Quadrature

Modulator w/ vGa, 50 - 2800 MHz