For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

8

8 - 6

Outline Drawing

HMC712LP3CE

v04.0410

GaAs MMIC VOLTAGE-VARIABLE

ATTENUATOR, 5 - 26.5 GHz

notes:

1. PACKAGe BoDY MAterIAL: LoW stress InJeCtIon MoLDeD

PLAstIC sILICA AnD sILICon IMPreGnAteD.

2. LeAD AnD GrounD PADDLe MAterIAL: CoPPer ALLoY.

3. LeAD AnD GrounD PADDLe PLAtInG: 100% MAtte tIn.

4. DIMensIons Are In InCHes [MILLIMeters].

5. LeAD sPACInG toLerAnCe Is non-CuMuLAtIVe.

6. PAD Burr LenGtH sHALL Be 0.15mm MAX.

PAD Burr HeIGHt sHALL Be 0.05mm MAX.

7. PACKAGe WArP sHALL not eXCeeD 0.05mm

8. ALL GrounD LeADs AnD GrounD PADDLe Must Be soLDereD

to PCB rF GrounD.

9. reFer to HIttIte APPLICAtIon note For suGGesteD PCB

LAnD PAttern.

Part number

Package Body Material

Lead Finish

MsL rating

HMC712LP3Ce

roHs-compliant Low stress Injection Molded Plastic

100% matte sn

MsL1

[2]

H712

XXXX

[1] 4-Digit lot number XXXX

[2] Max peak reflow temperature of 260 °C

Package Information