For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

4

4 - 10

HMC705LP4 / 705LP4E

v03.0709

6.5 GHz PROGRAMMABLE

DIVIDER (N = 1 - 17)

Evaluation PCB

List of Materials for

item

Description

J1 - J4

PcB Mount sMA connector

J5

14 Position Header

J6

4 Position Header

r1

10K ohm resistor network, Bissel sMD

c1, c2

1000 pF capacitor, 0402 Pkg.

c3 - c5

100 pF capacitor, 0402 Pkg.

c6 - c8

1000 pF capacitor, 0603 Pkg.

c9

4.7 μF tantalum capacitor, case A

u1

HMc705LP4(e) Programmable Divider

116991 eval Board

[1] reference this number when ordering complete evaluation PcB

[2] circuit Board Material: rogers 4350

the circuit board used in the application should use

rF circuit design techniques. signal lines should have

50 ohm impedance while the package ground leads

and backside ground paddle should be connected

directly to the ground plane similar to that shown. A

sufficient number of via holes should be used to con-

nect the top and bottom ground planes. the evalua-

tion circuit board shown is available from Hittite upon

request.