9

9 - 7

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC682LP6C / 682LP6CE

v00.0308

HIGH IP3 DUAL CHANNEL

DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz

Pin number

Function

Description

interface schematic

1, 10

rF1, rF2

these are the rF inputs of the mixers. see application

circuit for the off-chip matching components

2, 9

tAP1, tAP2

these are the center taps of the internal rF baluns.

connect these pins to the Ac ground via external

capacitors. see application circuit.

3, 5, 8, 15,

16, 22, 23,

26 - 29, 36, 35

GnD

these pins must be connected to rF ground.

4, 7

BiAs1, BiAs2

Bias pins for mixer cores. see

application circuit for the nominal value.

6, 17, 18,

24, 33, 34

vcc1, vcc_BAL2,

vcc_AmP2,

vcc2, vcc_AmP1,

vcc_BAL1

Power supply voltage pins. see application

circuit for required external components.

11, 20, 31, 40

n/c

no connection required. these pins may be connected

to rF GnD without affecting performance.

12, 39

inD1, inD2

current source inductors for iF amplifiers.

13, 14,

38, 37

iF2P, iF2n,

iF1P, iF1n

Differential iF outputs and Dc BiAs for iF Amps.

19, 32

BiAs_ADJ1,

BiAs_ADJ2

Adjusts Lo buffer amplifies current via

external resistor. see application circuit.

21, 30

Lo2, Lo1

these are Lo inputs of the mixers. see application

circuit for off-chip matching components.

25

Lo_seL

control voltage for Lo1 or Lo2 selection. Lo1 is

selected when Lo seL is set low. Lo2 is selected when

Lo seL is set high. see application circuit and truth

table for low and high voltage levels.

Pin Descriptions