7

7 - 97

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Outline Drawing

HMC575LP4 / 575LP4E

v00.0506

SMT GaAs MMIC x2 ACTIVE FREQUENCY

MULTIPLIER, 6 - 9 GHz OUTPUT

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED

LAND PATTERN.

Part Number

Package Body Material

Lead Finish

MSL Rating

Package Marking

[3]

HMC575LP4

Low Stress Injection Molded Plastic

Sn/Pb Solder

MSL1

[1]

H575

XXXX

HMC575LP4E

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

MSL1

[2]

H575

XXXX

[1] Max peak reflow temperature of 235 °C

[2] Max peak reflow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information