7

7 - 87

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Evaluation PCB

Item

Description

J1, J2

PCB Mount SRI K Connector

J3 - J5

DC Pin

C1, C2

100 pF Capacitor, 0402 Pkg.

C3, C4

1,000 pF Capacitor, 0603 Pkg.

C5, C6

2.2 μF Tantalum Capacitor

U1

HMC561LP3E x2 Active Multiplier

115555 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

The circuit board used in the final application should

be generated with proper RF circuit design tech-

niques. Signal lines should have 50 ohm imped-

ance while the package ground leads and exposed

paddle should be connected directly to the ground

plane similar to that shown. A sufficient number of

via holes should be used to connect the top and

bottom ground planes. The evaluation circuit board

shown is available from Hittite upon request.

v01.0407

SMT GaAs MMIC x2 ACTIVE FREQUENCY

MULTIPLIER, 8 - 21 GHz OUTPUT