For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7

7 - 1

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 700 - 1000 MHz

v01.0610

General Description

Features

Functional Diagram

The HMC376LP3 & HMC376LP3E are GaAs PHEMT

MMIC Low Noise Amplifiers that are ideal for GSM

& CDMA cellular basestation front-end receivers

operating between 700 and 1000 MHz. The amplifier

has been optimized to provide 0.7 dB noise figure,

15 dB gain and +36 dBm output IP3 from a single

supply of +5V. The HMC376LP3(E) feature an

externally adjustable supply current which allows the

designer to tailor the linearity performance of the LNA

for each application. For applications which require

improved noise figure, please see the HMC617LP3(E).

Noise Figure: 0.7 dB

Output IP3: +36 dBm

Gain: 15 dB

Externally Adjustable Supply Current

Single Positive Supply: +5V

50 Ohm Matched Input/Output

Typical Applications

The HMC376LP3 / HMC376LP3E is ideal for:

• Cellular/3G Infrastructure

• Base Stations & Repeaters

• CDMA, W-CDMA, & TD-SCDMA

• Private Land Mobile Radio

• GSM/GPRS & EDGE

• UHF Reallocation Applications

Parameter

Min.

Typ.

Max.

Min.

Typ.

Max.

Units

Frequency Range

810 - 960

700 - 1000

MHz

Gain

12.5

14.5

11.5

14.5

dB

Gain Variation Over Temperature

0.005

0.01

0.005

0.01

dB / °C

Noise Figure

0.7

1.0

0.7

1.0

dB

Input Return Loss

13

14

dB

Output Return Loss

12

12

dB

Reverse Isolation

20

22

dB

Output Power for 1dB Compression (P1dB)

21.5

21

dBm

Saturated Output Power (Psat)

22

22

dBm

Output Third Order Intercept (IP3)

(-20 dBm Input Power per tone, 1 MHz tone spacing)

36

36

dBm

Supply Current (Idd)

73

73

mA

*Rbias resistor value sets current, see application circuit herein.