9

9 - 58

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Evaluation Circuit Board

Item

Description

J1 - J3

PCB Mount SMA RF Connector

U1

HMC175MS8 / HMC175MS8E Mixer

101650 Evaluation Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

The circuit board used in the final application should

use RF circuit design techniques. Signal lines should

have 50 ohm impedance while the package ground

leads and exposed paddle should be connected

directly to the ground plane similar to that shown. A

sufficient number of via holes should be used to con-

nect the top and bottom ground planes. The evalua-

tion circuit board shown is available from Hittite upon

request.

GaAs MMIC SMT DOUBLE-

BALANCED MIXER, 1.7 - 4.5 GHz

v02.0705