MOSA

MS6257

Gain and Attenuation Volume Controller IC

REV 6

13

www.mosanalog.com

DEMO BOARD

Label 1: Supply Voltage

The AVDD and DVDD should be the same supply voltage, the supply range is 2.7~6.5 VDC.

2-CH+ : The volume-up switch for stereo channel

The volume increase by +1dB as the switch is pressed once, the maximum value is up to +15dB.

The default value is 0dB on initial status.

L-channel and R-channel are active synchronic.

2-CH- : The volume-down switch for stereo channel

The volume decrease by -1dB as the switch is pressed once, the minimum value is up to -79dB.

L-channel and R-channel are active synchronic.

LCH+ : The volume-up switch for left channel

The volume increase by +1dB as the switch is pressed once, the maximum value is up to +15dB.

LCH- : The volume-down switch for left channel

The volume decrease by -1dB as the switch is pressed once, the minimum value is up to -79dB.

RCH+ : The volume-up switch for right channel

The volume increase by +1dB as the switch is pressed once, the maximum value is up to +15dB.

RCH- : The volume-down switch for right channel

The volume decrease by -1dB as the switch is pressed once, the minimum value is up to -79dB.

MUTE : Press the switch once to enter mute-on or mute-off.

The default status is mute-off on initial status.

RESET : Reset MCU controller, the system will be loaded default value.

1

1

2

3

4