PCA9306D datasheet(2/26 Pages) NXP

2 / 26 page

PCA9306

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 25 November 2010

2 of 26

NXP Semiconductors

PCA9306

Dual bidirectional I2C-bus and SMBus voltage-level translator

All channels have the same electrical characteristics and there is minimal deviation from

one output to another in voltage or propagation delay. This is a benefit over discrete

transistor voltage translation solutions, since the fabrication of the switch is symmetrical.

The translator provides excellent ESD protection to lower voltage devices, and at the

same time protects less ESD-resistant devices.

Features and benefits

2-bit bidirectional translator for SDA and SCL lines in mixed-mode I2C-bus applications

Standard-mode, Fast-mode, and Fast-mode Plus I2C-bus and SMBus compatible

Less than 1.5 ns maximum propagation delay to accommodate Standard-mode and

Fast-mode I2C-bus devices and multiple masters

Allows voltage level translation between:

1.0 V Vref(1) and 1.8 V, 2.5 V, 3.3 V or 5 V Vbias(ref)(2)

1.2 V Vref(1) and 1.8 V, 2.5 V, 3.3 V or 5 V Vbias(ref)(2)

1.8 V Vref(1) and 3.3 V or 5 V Vbias(ref)(2)

2.5 V Vref(1) and 5 V Vbias(ref)(2)

3.3 V Vref(1) and 5 V Vbias(ref)(2)

Provides bidirectional voltage translation with no direction pin

Low 3.5

Ω ON-state connection between input and output ports provides less signal

distortion

Open-drain I2C-bus I/O ports (SCL1, SDA1, SCL2 and SDA2)

5V tolerant I2C-bus I/O ports to support mixed-mode signal operation

High-impedance SCL1, SDA1, SCL2 and SDA2 pins for EN = LOW

Lock-up free operation

Flow through pinout for ease of printed-circuit board trace routing

ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per

JESD22-A115, and 1000 V CDM per JESD22-C101

Packages offered: SO8, TSSOP8, VSSOP8, XQFN8, XSON8, XSON8U

PCA9306D bảng dữ liệu(PDF) 2 Page - NXP Semiconductors