| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
EVAL-AD9838SDZ bảng dữ liệu(PDF) 16 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
EVAL-AD9838SDZ bảng dữ liệu(HTML) 16 Page - Analog Devices |
|
16 / 32 page ![]() AD9838 Rev. A | Page 16 of 32 The prominence of the aliased images depends on the ratio of fOUT to MCLK. If the ratio is small, the aliased images are very prominent and of a relatively high energy level as determined by the sin(x)/x roll-off of the quantized DAC output. In fact, depend- ing on the fOUT/reference clock ratio, the first aliased image can be on the order of −3 dB below the fundamental. A low-pass filter is generally placed between the output of the DAC and the input of the comparator to further suppress the effects of aliased images. To avoid unwanted (and unexpected) output anomalies, it is necessary to consider the relationship of the selected output frequency and the reference clock frequency. To apply the AD9838 as a clock generator, limit the selected output frequency to <33% of the reference clock frequency. In this way, the user can prevent the generation of aliased signals that fall within, or close to, the output band of interest (generally the dc selected output frequency). This practice reduces the complexity (and cost) of the external filter requirement for the clock generator application. For more information, see the AN-837 Application Note. To enable the comparator, the SIGN/PIB and OPBITEN bits in the control resister must be set to 1 (see Table 18). REGULATOR The AD9838 has separate power supplies for the analog and digital sections. AVDD provides the power supply required for the analog section, and DVDD provides the power supply for the digital section. Both supplies can have a value of 2.3 V to 5.5 V and are independent of each other. For example, the analog section can be operated at 5 V, and the digital section can be operated at 3 V, or vice versa. The internal digital section of the AD9838 is operated at 2.5 V. An on-board regulator steps down the voltage applied at DVDD to 2.5 V. The digital interface (serial port) of the AD9838 also operates from DVDD. These digital signals are level shifted within the AD9838 to make them 2.5 V compatible. If the voltage applied at the DVDD pin of the AD9838 is less than or equal to 2.7 V, the CAP/2.5V and DVDD pins should be tied together to bypass the on-board regulator. SYSTEM CLOCK fOUT fC – fOUT fC + fOUT 2 fC – fOUT 2 fC + fOUT 3 fC – fOUT 3 fC + fOUT fC 0Hz FIRST IMAGE SECOND IMAGE THIRD IMAGE FOURTH IMAGE FIFTH IMAGE SIXTH IMAGE 2 fC 3 fC FREQUENCY (Hz) sin(x)/x ENVELOPE x = π ( f/fC) Figure 21. DAC Output Spectrum |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |