PIC12F1840 datasheet(91/382 Pages) MICROCHIP

91 / 382 page

 2011 Microchip Technology Inc.

Preliminary

DS41441B-page 91

PIC12(L)F1840

9.2

Low Power Sleep Mode

The PIC12F1840 device contains an internal Low

Dropout (LDO) voltage regulator, which allows the

device I/O pins to operate at voltages up to 5.5V while

the internal device logic operates at a lower voltage.

The LDO and its associated reference circuitry must

remain active when the device is in Sleep mode. The

PIC12F1840 allows the user to optimize the operating

current in Sleep, depending on the application require-

ments.

A Low-Power Sleep mode can be selected by setting

the VREGPM bit of the VREGCON register. With this

bit set, the LDO and reference circuitry are placed in a

low-power state when the device is in Sleep.

9.2.1

SLEEP CURRENT VS. WAKE-UP

TIME

In the default operating mode, the LDO and reference

circuitry remain in the normal configuration while in

Sleep. The device is able to exit Sleep mode quickly

since all circuits remain active. In Low-Power Sleep

mode, when waking up from Sleep, an extra delay time

is required for these circuits to return to the normal con-

figuration and stabilize.

The Low-Power Sleep mode is beneficial for applica-

tions that stay in Sleep mode for long periods of time.

The normal mode is beneficial for applications that

need to wake from Sleep quickly and frequently.

9.2.2

PERIPHERAL USAGE IN SLEEP

Some peripherals that can operate in Sleep mode will

not operate properly with the Low-Power Sleep mode

selected. The LDO will remain in the normal power

mode when those peripherals are enabled. The Low-

Power Sleep mode is intended for use with these

peripherals:

• Brown-Out Reset (BOR)

• Watchdog Timer (WDT)

• External interrupt pin/Interrupt-on-change pins

• Timer1 (with external clock source)

• Comparator

• ECCP (Capture mode)

Note:

The PIC12LF1840 does not have a con-

figurable

Low-Power

Sleep

mode.

PIC12LF1840 is an unregulated device

and is always in the lowest power state

when in Sleep, with no wake-up time pen-

alty. This device has a lower maximum

VDD

and

I/O

voltage

than

the

PIC12F1840. See Section 30.0 “Electri-

cal Specifications”

for more information.

VREGCON: VOLTAGE REGULATOR CONTROL REGISTER(1)

U-0

R/W-0/0

R/W-1/1

—

—VREGPM

Reserved

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

u = Bit is unchanged

x = Bit is unknown

-n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set

‘0’ = Bit is cleared

bit 7-2

Unimplemented:

Read as ‘0’

bit 1

VREGPM:

Voltage Regulator Power Mode Selection bit

= Low Power Sleep mode enabled in Sleep

Draws lowest current in Sleep, slower wake-up

= Normal Power mode enabled in Sleep

Draws higher current in Sleep, faster wake-up

bit 0

Reserved:

Read as ‘1’. Maintain this bit set.

Note 1:

PIC12F1840 only.

PIC12F1840 bảng dữ liệu(PDF) 91 Page - Microchip Technology

PIC12F1840 bảng dữ liệu(HTML) 91 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL