HCS512 datasheet(19/34 Pages) MICROCHIP

19 / 34 page

DS40151E-page 19

HCS512

10.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Ambient temperature under bias.............................................................................................................-55°C to +125°C

Storage temperature ...............................................................................................................................-65°C to +150°C

Voltage on any pin with respect to VSS (except VDD) ............................................................................ -0.6V to VDD +0.6V

Voltage on VDD with respect to Vss....................................................................................................................0 to +7.5V

Total power dissipation (Note 1) ..........................................................................................................................800 mW

Maximum current out of VSS pin.............................................................................................................................150 mA

Maximum current into VDD pin................................................................................................................................100 mA

Input clamp current, Iik (VI < 0 or VI > VDD) ............................................................................................................± 20 mA

Output clamp current, IOK (VO < 0 or VO >VDD) ....................................................................................................± 20 mA

Maximum output current sunk by any I/O pin..........................................................................................................25 mA

Maximum output current sourced by any I/O pin ....................................................................................................20 mA

Note:

Power dissipation is calculated as follows: Pdis = VDD x {IDD -

∑IOH} + ∑{(VDD–VOH) x IOH} + ∑(VOl x IOL)

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above

those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

HCS512 bảng dữ liệu(PDF) 19 Page - Microchip Technology

HCS512 bảng dữ liệu(HTML) 19 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

bảng dữ liệu tải về

Link URL