SPST Non-Reflective AlGaAs PIN Diode Switch

V5

MA4AGSW1A

ADVANCED:

Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY:

Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

2

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

(On-wafer measurements)

Parameter

Ports

Bias Conditions

Frequency Typical

Insertion Loss

J1 - J2

Bias J1 — -1.35V/10mA

50Ghz

1.2dB

Bias B — -1.35V/0mA

Isolation

J1 - J2

Port J1 — +1.35V/10mA

50Ghz

30dB

Bias B — +1.35V/10mA

Input return Loss

J1- J2 (Terminated by 50Ω)

Port J1 — -1.35V/10mA

50Ghz

15dB

Bias B — -1.35V/0mA

Output Return Loss

(Insertion loss))

J2- J1 (Terminated by 50Ω)

Port J1 — -1.35V/10mA

50Ghz

18dB

Bias B — -1.35V/0mA

Output Return Loss

(Isolation)

J2

Port J1 — +1.35V/10mA

50Ghz

18dB

Bias B — +1.35V/10mA

Switching Speed

(10% - 90% RF Voltage)

J1 - J2

±5V PIN TTL Driver

10GHz

10nS

1MHz Repetition Frequency.

Notes:

1. Typical switching speed is measured from 10% to 90% of the detected RF voltage driven by a TTL

compatible driver. Driver output parallel RC network uses a capacitor between 390 pF - 560 pF and

a resistor between 150 - 220 Ohms to achieve 10 ns rise and fall times.

2. Bias nodes, J1 and B may be connected together