HT68F13 datasheet(6/161 Pages) HOLTEK

6 / 161 page

Features

CPUFeatures

· Operating Voltage:

fSYS= 8MHz: 2.2V~5.5V

fSYS= 12MHz: 2.7V~5.5V

fSYS= 20MHz: 4.5V~5.5V

· Up to 0.2

ms instruction cycle with 20MHz system clock at VDD=5V

· Power down and wake-up functions to reduce power consumption

· Four oscillators:

External Crystal -- HXT

External RC -- ERC

Internal RC -- HIRC

Internal 32kHz RC -- LIRC

· Multi-mode operation: NORMAL, SLOW, IDLE and SLEEP

· Fully integrated internal 4MHz, 8MHz and 12MHz oscillator requires no external components

· All instructions executed in one or two instruction cycles

· Table read instructions

· 63 powerful instructions

· Up to 8-level subroutine nesting

· Bit manipulation instruction

PeripheralFeatures

· Flash Program Memory: 1K

´14 ~ 4K´15

· RAM Data Memory: 64

´8 ~ 192´8

· Watchdog Timer function

· Up to 26 bidirectional I/O lines

· Software controlled 4-SCOM lines LCD driver with 1/2 bias

· Multiple pin-shared external interrupts

· Multiple Timer Module for time measure, input capture, compare match output, PWM output or

single pulse output function

· Single Time-Base function for generation of fixed time interrupt signal

· Low voltage reset function

· Low voltage detect function

· Wide range of available package types

GeneralDescription

The HT68F1x series of devices are Flash Memory I/O type 8-bit high performance RISC architecture

microcontrollers. Offering users the convenience of Flash Memory multi-programming features, these

devices also include a wide range of functions and features. Other memory includes an area of RAM

Data Memory for application program data storage.

Multiple and extremely flexible Timer Modules provide timing, pulse generation and PWM

generation functions. Protective features such as an internal Watchdog Timer, Low Voltage Reset and

Low Voltage Detector coupled with excellent noise immunity and ESD protection ensure that reliable

operation is maintained in hostile electrical environments.

A full choice of HXT, ERC, HIRC and LIRC oscillator functions are provided including a fully

integrated system oscillator which requires no external components for its implementation. The ability

to operate and switch dynamically between a range of operating modes using different clock sources

gives users the ability to optimise microcontroller operation and minimise power consumption.

Rev.1.10

February9,2011

HT68F13/HT68F14/HT68F15

EnhancedI/OFlashType MCU

HT68F13 bảng dữ liệu(PDF) 6 Page - Holtek Semiconductor Inc

HT68F13 bảng dữ liệu(HTML) 6 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL