PS No. 5588-21/21

LC75373E

Usage Notes

1. The states of the internal analog switches are undefined when power is first applied. Use an external muting circuit or

other technique to mute the outputs until correct control data has been set up in the LC75373E.

2. Either cover the lines connected to the CL, DI, and CE pins with the ground pattern or use shielded cable for those

lines to prevent the high-frequency digital signals on those lines from entering the analog system.

This catalog provides information as of February, 1998. Specifications and information herein are subject to

change without notice.

s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace

equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of

which may directly or indirectly cause injury, death or property loss.

s Anyone purchasing any products described or contained herein for an above-mentioned use shall:

ΠAccept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and

distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all

damages, cost and expenses associated with such use:

 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on

SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees

jointly or severally.

s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for

volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied

regarding its use or any infringements of intellectual property rights or other rights of third parties.