| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MIC22200YML bảng dữ liệu(PDF) 3 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
MIC22200YML bảng dữ liệu(HTML) 3 Page - Micrel Semiconductor |
|
3 / 22 page ![]() Micrel, Inc. MIC22200 December 2010 3 M9999-120310-C Absolute Maximum Ratings (1) Supply Voltage (PVIN, SVIN ) ............................................+6V Output Switch (SW)..........................................................6V Logic Voltage (EN/DLY, POR, DELAY) ............VIN to -0.3V Control Voltage (CF, RC, COMP, FB) ..............VIN to -0.3V Lead Temperature (soldering 10s)............................. 260°C Storage Temperature Range (Ts)............. −65°C to +150°C EDS Rating (3).................................................................. 2kV Operating Ratings (2) Supply Voltage (VIN)..................................... +2.6V to +5.5V Junction Temperature Range (TJ).......−40°C ≤ TJ ≤ +125°C Thermal Resistance 3mm × 3mm MLF-12L (θJA)...............................40°C/W Electrical Characteristics (4) TA = 25°C with VIN = VEN = 3.3V, unless otherwise specified. Bold values indicate −40°C ≤ TJ ≤ +125°C Parameter Condition Min. Typ. Max. Units Supply Voltage Range 2.6 5.5 V Under-Voltage Lockout Threshold (turn-on) 2.4 2.5 2.6 V UVLO Hysteresis 280 mV Quiescent Current, PWM mode VEN ≥ 1.34V; VFB = 0.9V 1.2 2 mA Shutdown Current VEN = 0V 3.7 10 µA Feedback Voltage ± 2% (over temperature) 0.686 0.7 0.714 V Oscillator Frequency 0.8 1 1.2 MHz FB Pin Input Current 1 nA Current Limit VFB = 0.9*VNOM 2 5.5 8 A Output Voltage Line Regulation VIN = 2.6V to 5.5V 0.2 % Output Voltage Load Regulation 100mA < ILOAD < 2A, VIN = 3.3V 0.2 % Maximum Duty Cycle VFB ≤ 0.5V 100 % Switch ON-Resistance PFET Switch ON-Resistance NFET ISW = 1000mA VFB=0.5V ISW = -1000mA VFB=0.9V 0.18 0.10 Ω EN/DLY Threshold Voltage VIN=3.3V 1.14 1.24 1.34 V EN/DLY Hysteresis 12 mV DELAY Threshold Voltage VIN=3.3V 1.14 1.24 1.34 V DELAY Hysteresis 6 mV EN/DLY Source Current VIN = 2.6 to VIN = 5.5V 0.7 1 1.3 µA RC Source Current Ramp Control Current 0.7 1 1.3 µA POR IPG(LEAK) VPORH = 5.5V; POR = High 1 2 µA POR VPG(LO) Output Logic-Low Voltage (undervoltage condition), IPOR = 5mA 135 mV Notes: 1. Exceeding the absolute maximum rating may damage the device. 2. The device is not guaranteed to function outside its operating rating. 3. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k in series with 100pF. 4. Specification for packaged product only. |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |