Evaluation Kit User Manual for CMX017

EV0171

© 1999 Consumer Microcircuits Limited

4

UM0171/2

1.2

Preliminary Information

1.2.1

Laboratory Equipment

The following laboratory equipment is needed to use this evaluation kit:

1.2.1.1 6 - 12 V dc Power Supply

1.2.1.2 Radio Communications Test Set or similar

1.2.1.3 Modulation source

1.2.2

Handling Precautions

Like most evaluation kits, this product is designed for use in office and laboratory environments. The

following practices will help ensure its proper operation.

1.2.2.1 Static Protection

This product uses low power CMOS circuits which can be damaged by electrostatic discharge.

Partially damaged circuits can function erroneously, leading to misleading results. Observe ESD

precautions at all times when handling this product.

1.2.2.2 Contents - Unpacking

Please ensure that you have received all of the items on the separate information sheet (EK0171) and

notify CML within 7 working days if the delivery is incomplete.

1.2.3

Approvals

This Evaluation Kit is capable of producing radio frequency emissions. Users are advised to

observe local statutory requirements which may apply to this product.