Page 14

5. Hardware

5.1 Introduction

This section describes the PCB hardware and its adjustment.

5.2 Description

5.2.1 Functional Layout of Circuitry

The block diagram of the MX465 shown below shows internal connections to the MX465. Refer

to Figure 7: DB1065 Schematic, on page 20 for external circuitry on the DB1065 circuit board.

5.2.2 Connectors

Clamping connectors are distributed around the perimeter of the DB1065 motherboard as shown

in Figure 8: Component view Assembly Drawing, on page 21. Silk-screen labels are provided on

the motherboard to identify the connections listed in Error! Reference source not found.. Refer

to Figure 7: DB1065 Schematic, on page 20 in reference to the electrical connections to the

MX465.