SCXI 16-Channel RTD Module

4

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

Power Requirements from SCXI Backplane

V+

....................................................

18.5 to 25 VDC, 170 mA

V-

....................................................

-18.5 to -25 VDC, -170 mA

+5 V ....................................................

+4.75 to 5.25 VDC, 50 mA

Environmental

Operating temperature .......................

0 to 50 °C

Storage temperature...........................

-20 to 70 °C

Humidity ..............................................

10 to 90% RH, noncondensing

Maximum altitude...............................

2,000 m

Pollution degree (indoor use only)......

2

Physical

Weight.................................................

745 g (26.3 oz)

Maximum Working Voltage

Maximum working voltage refers to the signal voltage plus the common-

mode voltage.

Signal + common mode ......................

Each input should remain within

±10 V of AI GND

Safety

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

and laboratory use:

• IEC 61010-1, EN-61010-1

• UL 61010-1, CSA 61010-1

Note: For UL and other safety certifications, refer to the product label or

click the appropriate link in the Certification column.

Electromagnetic Compatibility

This product is designed to meet the requirements of the following

standards of EMC for electrical equipment for measurement, control, and

laboratory use:

• EN 61326 EMC requirements; Minimum Immunity

• EN 55011 Emissions; Group 1, Class A

• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A

Note: For EMC compliance, operate this device according to

product documentation.

CE Compliance

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

• 2006/95/EC; Low-Voltage Directive (safety)

• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Note: Refer to the Declaration of Conformity (DoC) for this product for

any additional regulatory compliance information. To obtain the DoC for

product line, and click the appropriate link in the Certification column.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers: At the end of their life cycle, all products must be

sent to a WEEE recycling center. For more information about WEEE

recycling centers and National Instruments WEEE initiatives, visit

18.8 cm

(7.4 in.)

17.2 cm

(6.8 in.)

3.0 cm

(1.2 in.)

Figure 2. SCXI-1503 Dimensions