 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MB90F482B bảng dữ liệu(PDF) 84 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
MB90F482B bảng dữ liệu(HTML) 84 Page - fujitsu semiconductor |
|
|
84 / 124 page  MB90480B/485B Series 84 DS07-13722-11E ■ ELECTRICAL CHARACTERISTICS 1. Absolute Maximum Ratings *1 : This parameter is based on VSS = AVSS = 0.0 V. *2 : AVCC and AVRH must not exceed VCC. Also, AVRH must not exceed AVCC. *3 : VI and V0 must not exceed VCC + 0.3 V. However, if the maximum current to/from and input is limited by some means with external components, the ICLAMP rating supersedes the VI rating. *4 : Maximum output current is defined as the peak value for one of the corresponding pins. *5 : Average output current is defined as the average current flow in a 100 ms interval at one of the corresponding pins. *6 : Average total output current is defined as the average current flow in a 100 ms interval at all corresponding pins. *7 : • Applicable to pins : P00 to P07, P10 to P17, P20 to P27, P30 to P37, P40 to P47, P50 to P57, P60 to P67, P70 to P77, P80 to P87, P90 to P97, PA0 to PA3 • Use within recommended operating conditions. • Use at DC voltage (current) . • The + B signal should always be applied with a limiting resistance placed between the + B signal and the microcontroller. • The value of the limiting resistance should be set so that when the + B signal is applied the input current to the microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods. (Continued) Parameter Symbol Rating Unit Remarks Min Max Power supply voltage*1 VCC3VSS − 0.3 VSS + 4.0 V VCC5VSS − 0.3 VSS + 7.0 V AVCC VSS − 0.3 VSS + 4.0 V *2 AVRH VSS − 0.3 VSS + 4.0 V *2 Input voltage*1 VI VSS − 0.3 VSS + 4.0 V *3 VSS − 0.3 VSS + 7.0 V *3, *8, *9 Output voltage*1 VO VSS − 0.3 VSS + 4.0 V *3 VSS − 0.3 VSS + 7.0 V *3, *8, *9 Maximum clamp current ICLAMP − 2.0 + 2.0 mA *7 Total maximum clamp current Σ⏐ICLAMP⏐⎯ 20 mA *7 “L” level maximum output current IOL ⎯ 10 mA *4 “L” level average output current IOLAV ⎯ 3mA *5 “L” level maximum total output current ΣIOL ⎯ 60 mA “L” level total average output current ΣIOLAV ⎯ 30 mA *6 “H” level maximum output current IOH ⎯−10 mA *4 “H” level average output current IOHAV ⎯−3mA *5 “H” level maximum total output current ΣIOH ⎯−60 mA “H” level total average output current ΣIOHAV ⎯−30 mA *6 Power consumption PD ⎯ 320 mW Operating temperature TA − 40 + 85 °C Storage temperature Tstg − 55 + 150 °C |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
