LM2575EP datasheet(10/26 Pages) NSC

tên linh kiện	LM2575EP

Giải thích chi tiết về linh kiện	SIMPLE SWITCHER 1A Step-Down Voltage Regulator

PDF	26 Pages

Scroll/Zoom	100%

nhà sản xuất	NSC [National Semiconductor (TI)]

Trang chủ	http://www.national.com

Logo

10 / 26 page

Typical Performance Characteristics (Circuit of Figure 2) (Continued)

Feedback Pin Current

Maximum Power Dissipation

(TO-263) (See (Note 14))

20113205

20113228

Switching Waveforms

Load Transient Response

20113206

VOUT =5V

A: Output Pin Voltage, 10V/div

B: Output Pin Current, 1A/div

C: Inductor Current, 0.5A/div

D: Output Ripple Voltage, 20 mV/div,

AC-Coupled

Horizontal Time Base: 5 µs/div

20113207

Test Circuit and Layout Guidelines

As in any switching regulator, layout is very important. Rap-

idly switching currents associated with wiring inductance

generate voltage transients which can cause problems. For

minimal inductance and ground loops, the length of the leads

indicated by heavy lines should be kept as short as possible.

Single-point grounding (as indicated) or ground plane con-

struction should be used for best results. When using the

Adjustable version, physically locate the programming resis-

tors near the regulator, to keep the sensitive feedback wiring

short.

LM2575EP bảng dữ liệu(PDF) 10 Page - National Semiconductor (TI)